Free Vacay Mode SVG

Vacay Mode in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Vacay Mode in Amatic SC, as a solid black shape
Vacay Mode in Amatic SC. The preview is the SVG file itself.

“Vacay Mode” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size78 × 100 mm (3.07 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut13: 9 outer edges and 4 cut-outs
Cut length1,323 mm at this size
Narrowest part2.5 mm at this size
Nodes371 curve and line segments

Measured from the file. PNG: 1,577 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)0.64 mm336 mm120Fine detail: vinyl and paper only, weed with care
1.56 × 2 in (40 × 51 mm)1.3 mm672 mm30Vinyl, card and thin sheet
2.34 × 3 in (59 × 76 mm)1.9 mm1,008 mm12Vinyl, card and thin sheet
3.12 × 4 in (79 × 102 mm)2.5 mm1,344 mm6Vinyl, card and thin sheet
4.68 × 6 in (119 × 152 mm)3.8 mm2,016 mm2Any material, including 3 mm wood and acrylic
6.24 × 8 in (158 × 203 mm)5.1 mm2,688 mm1Any material, including 3 mm wood and acrylic
9.36 × 12 in (238 × 305 mm)7.6 mm4,033 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Vacay Mode SVG files

← Vacay Mode in Alfa Slab One All 13 Vacay Mode designs Vacay Mode in block capitals →