Free Vacay Mode SVG

Vacay Mode with a drop shadow SVG

Vacay Mode with a drop shadow, in layered colours
Vacay Mode with a drop shadow. The preview is the SVG file itself.

“Vacay Mode” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 93 mm (3.94 × 3.68 in), scales to any size
Pieces4 separate pieces
Outlines to cut19: 4 outer edges and 15 cut-outs
Cut length2,069 mm at this size
Narrowest part5.7 mm at this size
Nodes616 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,873 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)1.4 mm526 mm100Vinyl, card and thin sheet
2 × 1.87 in (51 × 47 mm)2.9 mm1,051 mm25Vinyl, card and thin sheet
3 × 2.8 in (76 × 71 mm)4.3 mm1,577 mm12Any material, including 3 mm wood and acrylic
4 × 3.74 in (102 × 95 mm)5.8 mm2,102 mm6Any material, including 3 mm wood and acrylic
6 × 5.6 in (152 × 142 mm)8.7 mm3,153 mm2Any material, including 3 mm wood and acrylic
8 × 7.47 in (203 × 190 mm)12 mm4,204 mm1Any material, including 3 mm wood and acrylic
12 × 11.21 in (305 × 285 mm)17 mm6,306 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Vacay Mode SVG files

← Vacay Mode stencil plate All 12 Vacay Mode designs Vacay Mode in Pacifico →