Free US map SVG

US map cut from a plaque SVG

US map cut from a plaque, as a solid black shape
US map cut from a plaque. The preview is the SVG file itself.

A plaque 100 mm wide and 70 mm tall with rounded corners and the lower 48 cut out of it. Cut it from wood or acrylic as a sign, or use it as a stencil to paint the country on a board or a bag.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 70 mm (3.94 × 2.76 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length605 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes357 curve and line segments

Measured from the file. PNG: 2,000 × 1,423 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)Over 1.5 mm154 mm130Vinyl, card and thin sheet
2 × 1.4 in (51 × 36 mm)Over 3 mm307 mm35Any material, including 3 mm wood and acrylic
3 × 2.1 in (76 × 53 mm)Over 4.6 mm461 mm15Any material, including 3 mm wood and acrylic
4 × 2.8 in (102 × 71 mm)Over 6.1 mm615 mm8Any material, including 3 mm wood and acrylic
6 × 4.2 in (152 × 107 mm)Over 9.1 mm922 mm2Any material, including 3 mm wood and acrylic
8 × 5.6 in (203 × 142 mm)Over 12 mm1,229 mm2Any material, including 3 mm wood and acrylic
12 × 8.4 in (305 × 213 mm)Over 18 mm1,844 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More US map SVG files

← US map cut from a disc All 11 US maps US map cut from a heart →