Free US map SVG

Split US map for a name SVG

Split US map for a name, as a solid black shape
Split US map for a name. The preview is the SVG file itself.

The map divided by a clear band 14 mm tall across its middle, for a family name, a road trip or a date set between the two halves. The halves are loose pieces: line them up with transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 62 mm (3.94 × 2.43 in), scales to any size
Pieces3 separate pieces
Outlines to cut3 outlines
Cut length491 mm at this size
Narrowest part1.7 mm at this size
Nodes414 curve and line segments

Measured from the file. PNG: 2,000 × 1,263 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.43 mm125 mm140Too fine for most machines
2 × 1.23 in (51 × 31 mm)0.86 mm249 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.85 in (76 × 47 mm)1.3 mm374 mm15Vinyl, card and thin sheet
4 × 2.47 in (102 × 63 mm)1.7 mm499 mm8Vinyl, card and thin sheet
6 × 3.7 in (152 × 94 mm)2.6 mm748 mm3Vinyl, card and thin sheet
8 × 4.94 in (203 × 125 mm)3.5 mm998 mm2Any material, including 3 mm wood and acrylic
12 × 7.4 in (305 × 188 mm)5.2 mm1,497 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More US map SVG files

← US map cut from a heart All 11 US maps US map in stripes →