Free US map SVG

US map silhouette SVG

US map silhouette, as a solid black shape
US map silhouette. The preview is the SVG file itself.

The lower 48 states as one solid shape, 100 mm wide and 62 mm tall, drawn from the Census Bureau’s boundary files on the Albers projection that printed maps of the country use.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 62 mm (3.94 × 2.43 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length366 mm at this size
Narrowest part3.8 mm at this size
Nodes459 curve and line segments
Also found asUnited states SVG

Measured from the file. PNG: 2,000 × 1,263 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.97 mm93 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.23 in (51 × 31 mm)1.9 mm186 mm40Vinyl, card and thin sheet
3 × 1.85 in (76 × 47 mm)2.9 mm279 mm15Vinyl, card and thin sheet
4 × 2.47 in (102 × 63 mm)3.9 mm372 mm8Any material, including 3 mm wood and acrylic
6 × 3.7 in (152 × 94 mm)5.8 mm558 mm3Any material, including 3 mm wood and acrylic
8 × 4.94 in (203 × 125 mm)7.7 mm744 mm2Any material, including 3 mm wood and acrylic
12 × 7.4 in (305 × 188 mm)12 mm1,116 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More US map SVG files

← US map in stripes All 11 US maps US map with state lines →