Free umbrella SVG

Umbrella outline SVG

Umbrella outline, drawn as a line
Umbrella outline. The preview is the SVG file itself.

The open umbrella as one joined line: the scalloped canopy, three ribs running from crown to rim, the tip, the shaft and the hooked handle. For colouring pages, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size98 × 100 mm (3.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length795 mm at this size
Narrowest part2.5 mm at this size
Nodes108 curve and line segments

Measured from the file. PNG: 1,954 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.64 mm202 mm100Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (50 × 51 mm)1.3 mm404 mm25Vinyl, card and thin sheet
2.93 × 3 in (74 × 76 mm)1.9 mm606 mm9Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)2.5 mm808 mm4Vinyl, card and thin sheet
5.86 × 6 in (149 × 152 mm)3.8 mm1,212 mm2Any material, including 3 mm wood and acrylic
7.81 × 8 in (198 × 203 mm)5.1 mm1,615 mm1Any material, including 3 mm wood and acrylic
11.71 × 12 in (297 × 305 mm)7.6 mm2,423 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More umbrella SVG files

← Umbrella with hanging hearts All 13 umbrellas Patio umbrella from above →