Free umbrella SVG

Layered umbrella in three colours SVG

Layered umbrella in three colours, in layered colours
Layered umbrella in three colours. The preview is the SVG file itself.

Three layers to stack: a red canopy of six panels, three cream stripes that sit on every other panel and a brown layer with the tip, the shaft and the hooked handle.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.81 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut6 outlines
Cut length835 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes170 curve and line segments
Layers3: canopy, stripes and shaft and handle

Measured from the file. PNG: 1,938 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)Over 1.5 mm212 mm100Vinyl, card and thin sheet
1.94 × 2 in (49 × 51 mm)Over 3 mm424 mm25Any material, including 3 mm wood and acrylic
2.9 × 3 in (74 × 76 mm)Over 4.6 mm636 mm9Any material, including 3 mm wood and acrylic
3.87 × 4 in (98 × 102 mm)Over 6.1 mm848 mm4Any material, including 3 mm wood and acrylic
5.81 × 6 in (148 × 152 mm)Over 9.1 mm1,273 mm2Any material, including 3 mm wood and acrylic
7.74 × 8 in (197 × 203 mm)Over 12 mm1,697 mm1Any material, including 3 mm wood and acrylic
11.62 × 12 in (295 × 305 mm)Over 18 mm2,545 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More umbrella SVG files

← Umbrella in a rain boot All 13 umbrellas Open umbrella →