Free umbrella SVG

Umbrella in a rain boot SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Umbrella in a rain boot, as a solid black shape
Umbrella in a rain boot. The preview is the SVG file itself.

A pair of rain boots standing in a puddle with an open umbrella propped in the nearer one. A thin gap parts the two boots, and the puddle gives the design a level foot.

What is in the file

Size100 × 97 mm (3.94 × 3.81 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length754 mm at this size
Narrowest part1.8 mm at this size
Nodes110 curve and line segments

Measured from the file. PNG: 2,000 × 1,940 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.46 mm192 mm100Too fine for most machines
2 × 1.94 in (51 × 49 mm)0.91 mm383 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.91 in (76 × 74 mm)1.4 mm575 mm9Vinyl, card and thin sheet
4 × 3.88 in (102 × 98 mm)1.8 mm766 mm4Vinyl, card and thin sheet
6 × 5.81 in (152 × 148 mm)2.7 mm1,149 mm2Vinyl, card and thin sheet
8 × 7.75 in (203 × 197 mm)3.7 mm1,532 mm1Any material, including 3 mm wood and acrylic
12 × 11.63 in (305 × 295 mm)5.5 mm2,298 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More umbrella SVG files

← Umbrella monogram frame All 13 umbrellas Layered umbrella in three colours →