Thankful stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “THANKFUL” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 32 mm (3.94 × 1.26 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 740 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 168 curve and line segments |
Measured from the file. PNG: 2,000 × 692 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.32 in (25 × 8 mm) | 0.81 mm | 188 mm | 230 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.64 in (51 × 16 mm) | 1.6 mm | 376 mm | 70 | Vinyl, card and thin sheet |
| 3 × 0.96 in (76 × 24 mm) | 2.4 mm | 564 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.28 in (102 × 33 mm) | 3.3 mm | 752 mm | 16 | Any material, including 3 mm wood and acrylic |
| 6 × 1.92 in (152 × 49 mm) | 4.9 mm | 1,128 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.56 in (203 × 65 mm) | 6.5 mm | 1,504 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.84 in (305 × 98 mm) | 9.8 mm | 2,256 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thankful SVG files
-
Thankful with a drop shadow Layered · 2 pieces
-
Thankful with three ears of wheat Solid · 3 pieces
-
Thankful in Pacifico Solid · one piece
-
Thankful in Lobster Solid · 2 pieces
-
Thankful in Kaushan Script Solid · 8 pieces
-
Thankful in Lilita One Solid · 8 pieces
-
Thankful in Alfa Slab One Solid · 8 pieces
-
Thankful in Amatic SC Solid · 8 pieces
← Thankful outline lettering All 13 Thankful designs Thankful with a drop shadow →