Free Thankful SVG

Thankful with three ears of wheat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Thankful with three ears of wheat, as a solid black shape — Thankful with three ears of wheat. The preview is the SVG file itself.

“Thankful” with three ears of wheat above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 76 mm (3.94 × 2.98 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	6: 3 outer edges and 3 cut-outs
Cut length	1,008 mm at this size
Narrowest part	0.8 mm at this size
Nodes	381 curve and line segments

Measured from the file. PNG: 2,000 × 1,533 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.2 mm	256 mm	120	Too fine for most machines
2 × 1.51 in (51 × 38 mm)	0.41 mm	512 mm	35	Too fine for most machines
3 × 2.27 in (76 × 58 mm)	0.61 mm	768 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.03 in (102 × 77 mm)	0.81 mm	1,024 mm	6	Fine detail: vinyl and paper only, weed with care
6 × 4.54 in (152 × 115 mm)	1.2 mm	1,536 mm	2	Vinyl, card and thin sheet
8 × 6.06 in (203 × 154 mm)	1.6 mm	2,048 mm	1	Vinyl, card and thin sheet
12 × 9.08 in (305 × 231 mm)	2.4 mm	3,072 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thankful SVG files

← Thankful with a drop shadow All 13 Thankful designs Thankful in Pacifico →