Thankful in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Thankful” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 17 mm (3.94 × 0.65 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 9: 8 outer edges and 1 cut-out |
| Cut length | 536 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 161 curve and line segments |
Measured from the file. PNG: 2,000 × 396 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.17 in (25 × 4 mm) | 0.53 mm | 136 mm | 330 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.33 in (51 × 8 mm) | 1.1 mm | 272 mm | 110 | Vinyl, card and thin sheet |
| 3 × 0.5 in (76 × 13 mm) | 1.6 mm | 408 mm | 51 | Vinyl, card and thin sheet |
| 4 × 0.66 in (102 × 17 mm) | 2.1 mm | 545 mm | 28 | Vinyl, card and thin sheet |
| 6 × 1 in (152 × 25 mm) | 3.2 mm | 817 mm | 10 | Any material, including 3 mm wood and acrylic |
| 8 × 1.33 in (203 × 34 mm) | 4.3 mm | 1,089 mm | 7 | Any material, including 3 mm wood and acrylic |
| 12 × 1.99 in (305 × 51 mm) | 6.4 mm | 1,634 mm | 5 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thankful SVG files
-
Thankful in Amatic SC Solid · 8 pieces
-
Thankful in block capitals Solid · 8 pieces
-
Thankful with a swash underline Solid · 2 pieces
-
Thankful with hearts Solid · 8 pieces
-
Thankful outline lettering Outline · 8 pieces
-
Thankful stencil plate Solid · one piece
-
Thankful with a drop shadow Layered · 2 pieces
-
Thankful with three ears of wheat Solid · 3 pieces
← Thankful in Lilita One All 13 Thankful designs Thankful in Amatic SC →