Free Thankful SVG

Thankful outline lettering SVG

Thankful outline lettering, drawn as a line — Thankful outline lettering. The preview is the SVG file itself.

“Thankful” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 18 mm (3.94 × 0.71 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	18: 8 outer edges and 10 cut-outs
Cut length	899 mm at this size
Narrowest part	1.2 mm at this size
Nodes	272 curve and line segments

Measured from the file. PNG: 2,000 × 423 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.18 in (25 × 5 mm)	0.3 mm	228 mm	320	Too fine for most machines
2 × 0.36 in (51 × 9 mm)	0.61 mm	457 mm	105	Fine detail: vinyl and paper only, weed with care
3 × 0.54 in (76 × 14 mm)	0.91 mm	685 mm	48	Fine detail: vinyl and paper only, weed with care
4 × 0.72 in (102 × 18 mm)	1.2 mm	913 mm	26	Vinyl, card and thin sheet
6 × 1.08 in (152 × 27 mm)	1.8 mm	1,370 mm	9	Vinyl, card and thin sheet
8 × 1.44 in (203 × 37 mm)	2.4 mm	1,827 mm	7	Vinyl, card and thin sheet
12 × 2.16 in (305 × 55 mm)	3.7 mm	2,740 mm	5	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thankful SVG files

← Thankful with hearts All 12 Thankful designs Thankful stencil plate →