Helping Me Grow with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Thank You for Helping Me Grow” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.73 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 34: 14 outer edges and 20 cut-outs |
| Cut length | 2,778 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 952 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,898 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.71 mm | 706 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.89 in (51 × 48 mm) | 1.4 mm | 1,411 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.84 in (76 × 72 mm) | 2.1 mm | 2,117 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.79 in (102 × 96 mm) | 2.8 mm | 2,822 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.68 in (152 × 144 mm) | 4.3 mm | 4,234 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.58 in (203 × 192 mm) | 5.7 mm | 5,645 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.36 in (305 × 289 mm) | 8.5 mm | 8,467 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thank You for Helping Me Grow SVG files
-
Helping Me Grow with a flower Solid · 19 pieces
-
Helping Me Grow in Pacifico Solid · 8 pieces
-
Helping Me Grow in Lobster Solid · 14 pieces
-
Helping Me Grow in Kaushan Script Solid · 25 pieces
-
Helping Me Grow in Lilita One Solid · 25 pieces
-
Helping Me Grow in Alfa Slab One Solid · 25 pieces
-
Helping Me Grow in Amatic SC Solid · 24 pieces
-
Helping Me Grow in block capitals Solid · 24 pieces
← Helping Me Grow stencil plate All 13 Thank You for Helping Me Grow designs Helping Me Grow with a flower →