Free Thank You for Helping Me Grow SVG

Helping Me Grow in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Helping Me Grow in Lobster, as a solid black shape
Helping Me Grow in Lobster. The preview is the SVG file itself.

“Thank You for Helping Me Grow” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 83 mm (3.94 × 3.25 in), scales to any size
Pieces14 separate pieces
Outlines to cut24: 14 outer edges and 10 cut-outs
Cut length1,573 mm at this size
Narrowest part0.7 mm at this size
Nodes496 curve and line segments

Measured from the file. PNG: 2,000 × 1,663 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)0.18 mm400 mm110Too fine for most machines
2 × 1.65 in (51 × 42 mm)0.36 mm799 mm30Too fine for most machines
3 × 2.48 in (76 × 63 mm)0.53 mm1,199 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.3 in (102 × 84 mm)0.71 mm1,598 mm6Fine detail: vinyl and paper only, weed with care
6 × 4.95 in (152 × 126 mm)1.1 mm2,397 mm2Vinyl, card and thin sheet
8 × 6.6 in (203 × 168 mm)1.4 mm3,196 mm1Vinyl, card and thin sheet
12 × 9.9 in (305 × 251 mm)2.1 mm4,795 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thank You for Helping Me Grow SVG files

← Helping Me Grow in Pacifico All 13 Thank You for Helping Me Grow designs Helping Me Grow in Kaushan Script →