Helping Me Grow in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Thank You for Helping Me Grow” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 62 mm (3.94 × 2.43 in), scales to any size |
|---|---|
| Pieces | 25 separate pieces |
| Outlines to cut | 33: 25 outer edges and 8 cut-outs |
| Cut length | 1,302 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 420 curve and line segments |
Measured from the file. PNG: 2,000 × 1,265 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.62 in (25 × 16 mm) | 0.56 mm | 331 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.24 in (51 × 31 mm) | 1.1 mm | 661 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.85 in (76 × 47 mm) | 1.7 mm | 992 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.47 in (102 × 63 mm) | 2.2 mm | 1,323 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.71 in (152 × 94 mm) | 3.4 mm | 1,984 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.94 in (203 × 126 mm) | 4.5 mm | 2,646 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.42 in (305 × 188 mm) | 6.7 mm | 3,968 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thank You for Helping Me Grow SVG files
-
Helping Me Grow in Alfa Slab One Solid · 25 pieces
-
Helping Me Grow in Amatic SC Solid · 24 pieces
-
Helping Me Grow in block capitals Solid · 24 pieces
-
Helping Me Grow in script and capitals Solid · 18 pieces
-
Helping Me Grow with hearts Solid · 20 pieces
-
Helping Me Grow outline lettering Outline · 25 pieces
-
Helping Me Grow stencil plate Solid · one piece
-
Helping Me Grow with a drop shadow Layered · 14 pieces
← Helping Me Grow in Kaushan Script All 13 Thank You for Helping Me Grow designs Helping Me Grow in Alfa Slab One →