Free Thank You for Helping Me Grow SVG

Helping Me Grow in Alfa Slab One SVG

Helping Me Grow in Alfa Slab One, as a solid black shape
Helping Me Grow in Alfa Slab One. The preview is the SVG file itself.

“Thank You for Helping Me Grow” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 54 mm (3.94 × 2.12 in), scales to any size
Pieces25 separate pieces
Outlines to cut33: 25 outer edges and 8 cut-outs
Cut length1,351 mm at this size
Narrowest part1.7 mm at this size
Nodes806 curve and line segments

Measured from the file. PNG: 2,000 × 1,112 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.43 mm343 mm160Too fine for most machines
2 × 1.08 in (51 × 27 mm)0.86 mm686 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.61 in (76 × 41 mm)1.3 mm1,029 mm18Vinyl, card and thin sheet
4 × 2.15 in (102 × 55 mm)1.7 mm1,373 mm10Vinyl, card and thin sheet
6 × 3.23 in (152 × 82 mm)2.6 mm2,059 mm3Vinyl, card and thin sheet
8 × 4.3 in (203 × 109 mm)3.5 mm2,745 mm2Any material, including 3 mm wood and acrylic
12 × 6.46 in (305 × 164 mm)5.2 mm4,118 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thank You for Helping Me Grow SVG files

← Helping Me Grow in Lilita One All 12 Thank You for Helping Me Grow designs Helping Me Grow in Amatic SC →