Free tent SVG

Ridge tent with guy lines SVG

Ridge tent with guy lines, as a solid black shape
Ridge tent with guy lines. The preview is the SVG file itself.

A canvas ridge tent seen from one corner: both door flaps drawn back, a pole tip at each end of the ridge, a guy line running out front and back, and a hem line along the foot of the side wall.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 59 mm (3.94 × 2.3 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length748 mm at this size
Narrowest part4.1 mm at this size
Nodes42 curve and line segments

Measured from the file. PNG: 2,000 × 1,202 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)1 mm190 mm150Vinyl, card and thin sheet
2 × 1.17 in (51 × 30 mm)2.1 mm380 mm40Vinyl, card and thin sheet
3 × 1.75 in (76 × 45 mm)3.1 mm570 mm18Any material, including 3 mm wood and acrylic
4 × 2.34 in (102 × 59 mm)4.2 mm760 mm8Any material, including 3 mm wood and acrylic
6 × 3.51 in (152 × 89 mm)6.2 mm1,140 mm3Any material, including 3 mm wood and acrylic
8 × 4.68 in (203 × 119 mm)8.3 mm1,520 mm2Any material, including 3 mm wood and acrylic
12 × 7.02 in (305 × 178 mm)12 mm2,280 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tent SVG files

← Layered tent at night in six colours All 13 tents Tent silhouette between two firs →