Free tent SVG

Bell tent with a centre pole SVG

Bell tent with a centre pole, as a solid black shape
Bell tent with a centre pole. The preview is the SVG file itself.

A canvas bell tent of the glamping kind: a pointed roof with four seams, a ball on the centre pole, low walls, a doorway with its flaps parted and a guy line from each eave.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 70 mm (3.94 × 2.74 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length850 mm at this size
Narrowest part2.7 mm at this size
Nodes62 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,413 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.69 mm216 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.39 in (51 × 35 mm)1.4 mm432 mm35Vinyl, card and thin sheet
3 × 2.09 in (76 × 53 mm)2.1 mm648 mm15Vinyl, card and thin sheet
4 × 2.78 in (102 × 71 mm)2.7 mm864 mm8Vinyl, card and thin sheet
6 × 4.17 in (152 × 106 mm)4.1 mm1,295 mm2Any material, including 3 mm wood and acrylic
8 × 5.56 in (203 × 141 mm)5.5 mm1,727 mm2Any material, including 3 mm wood and acrylic
12 × 8.34 in (305 × 212 mm)8.2 mm2,591 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tent SVG files

← Dome tent All 13 tents Teepee camp tent →