Taurus celestial card SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An arched card 66 mm wide and 100 mm tall with the Taurus glyph cut out of it under a crescent moon and two stars, above a rising sun. A cut border runs round the card, held by four bridges.
What is in the file
| Size | 66 × 100 mm (2.6 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 20: 1 outer edge and 19 cut-outs |
| Cut length | 1,280 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 259 curve and line segments |
Measured from the file. PNG: 1,346 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | 0.48 mm | 325 mm | 140 | Too fine for most machines |
| 1.32 × 2 in (34 × 51 mm) | 0.97 mm | 650 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 1.98 × 3 in (50 × 76 mm) | 1.4 mm | 975 mm | 15 | Vinyl, card and thin sheet |
| 2.64 × 4 in (67 × 102 mm) | 1.9 mm | 1,300 mm | 8 | Vinyl, card and thin sheet |
| 3.96 × 6 in (101 × 152 mm) | 2.9 mm | 1,951 mm | 2 | Vinyl, card and thin sheet |
| 5.28 × 8 in (134 × 203 mm) | 3.9 mm | 2,601 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.92 × 12 in (201 × 305 mm) | 5.8 mm | 3,901 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Taurus SVG files
-
Taurus queen with a crown Solid · one piece -
Taurus bull head with a nose ring Solid · one piece -
Layered Taurus bull in three colours Layered · 3 pieces -
Taurus glyph Solid · one piece -
Taurus glyph in a ring Solid · one piece -
Taurus bull silhouette Solid · one piece -
Taurus bull line drawing Outline · one piece -
Taurus bull in a crescent moon Solid · one piece
← Taurus badge with a blank band All 13 Taurus designs Taurus queen with a crown →