Free Taurus SVG

Taurus badge with a blank band SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Taurus badge with a blank band. The preview is the SVG file itself.

A round badge with the Taurus glyph cut out of it, over a blank band 100 mm wide and 20 mm tall. The band is left empty for the dates, 20 April to 20 May, or for a name in your own lettering.

What is in the file

Size	100 × 82 mm (3.94 × 3.23 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	18: 1 outer edge and 17 cut-outs
Cut length	894 mm at this size
Narrowest part	1.9 mm at this size
Nodes	201 curve and line segments

Measured from the file. PNG: 2,000 × 1,654 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.48 mm	227 mm	110	Too fine for most machines
2 × 1.64 in (51 × 42 mm)	0.97 mm	454 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.46 in (76 × 62 mm)	1.4 mm	681 mm	12	Vinyl, card and thin sheet
4 × 3.28 in (102 × 83 mm)	1.9 mm	908 mm	6	Vinyl, card and thin sheet
6 × 4.92 in (152 × 125 mm)	2.9 mm	1,362 mm	2	Vinyl, card and thin sheet
8 × 6.56 in (203 × 167 mm)	3.9 mm	1,817 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.84 in (305 × 250 mm)	5.8 mm	2,725 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Taurus SVG files

← Taurus constellation night sky disc All 13 Taurus designs Taurus celestial card →