Taurus bull head with a nose ring SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A bull’s head from the front for Taurus: a broad brow with a parted forelock, two horns that sweep out and up, level ears, slanted eyes and a ring through the nose. Exactly mirrored about its centre line.
What is in the file
| Size | 100 × 99 mm (3.94 × 3.91 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 639 mm at this size |
| Narrowest part | 3.5 mm at this size |
| Nodes | 184 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,987 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.99 in (25 × 25 mm) | 0.89 mm | 162 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.99 in (51 × 50 mm) | 1.8 mm | 325 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.98 in (76 × 76 mm) | 2.7 mm | 487 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.97 in (102 × 101 mm) | 3.6 mm | 649 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 5.96 in (152 × 151 mm) | 5.3 mm | 974 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 7.94 in (203 × 202 mm) | 7.1 mm | 1,298 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.92 in (305 × 303 mm) | 11 mm | 1,948 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Taurus SVG files
-
Layered Taurus bull in three colours Layered · 3 pieces -
Taurus glyph Solid · one piece -
Taurus glyph in a ring Solid · one piece -
Taurus bull silhouette Solid · one piece -
Taurus bull line drawing Outline · one piece -
Taurus bull in a crescent moon Solid · one piece -
Taurus bull in a ring of stars Solid · one piece -
Taurus constellation Outline · one piece
← Taurus queen with a crown All 13 Taurus designs Layered Taurus bull in three colours →