Free Talk Thirty to Me SVG

Talk Thirty to Me in Lilita One SVG

Talk Thirty to Me in Lilita One, as a solid black shape — Talk Thirty to Me in Lilita One. The preview is the SVG file itself.

“Talk Thirty to Me” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.56 in), scales to any size
Pieces	15 separate pieces
Outlines to cut	18: 15 outer edges and 3 cut-outs
Cut length	730 mm at this size
Narrowest part	2.9 mm at this size
Nodes	255 curve and line segments

Measured from the file. PNG: 2,000 × 840 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	0.74 mm	185 mm	200	Fine detail: vinyl and paper only, weed with care
2 × 0.79 in (51 × 20 mm)	1.5 mm	371 mm	60	Vinyl, card and thin sheet
3 × 1.19 in (76 × 30 mm)	2.2 mm	556 mm	24	Vinyl, card and thin sheet
4 × 1.59 in (102 × 40 mm)	2.9 mm	742 mm	12	Vinyl, card and thin sheet
6 × 2.38 in (152 × 61 mm)	4.4 mm	1,113 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.18 in (203 × 81 mm)	5.9 mm	1,483 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.76 in (305 × 121 mm)	8.8 mm	2,225 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Talk Thirty to Me SVG files

← Talk Thirty to Me in Kaushan Script All 12 Talk Thirty to Me designs Talk Thirty to Me in Alfa Slab One →