Free Talk Thirty to Me SVG

Talk Thirty to Me in Amatic SC SVG

Talk Thirty to Me in Amatic SC, as a solid black shape
Talk Thirty to Me in Amatic SC. The preview is the SVG file itself.

“Talk Thirty to Me” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 66 mm (3.94 × 2.61 in), scales to any size
Pieces14 separate pieces
Outlines to cut17: 14 outer edges and 3 cut-outs
Cut length1,192 mm at this size
Narrowest part1 mm at this size
Nodes474 curve and line segments

Measured from the file. PNG: 2,000 × 1,354 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.25 mm303 mm140Too fine for most machines
2 × 1.33 in (51 × 34 mm)0.51 mm606 mm35Fine detail: vinyl and paper only, weed with care
3 × 1.99 in (76 × 51 mm)0.76 mm908 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.66 in (102 × 67 mm)1 mm1,211 mm8Vinyl, card and thin sheet
6 × 3.98 in (152 × 101 mm)1.5 mm1,817 mm2Vinyl, card and thin sheet
8 × 5.31 in (203 × 135 mm)2 mm2,422 mm2Vinyl, card and thin sheet
12 × 7.97 in (305 × 202 mm)3 mm3,633 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Talk Thirty to Me SVG files

← Talk Thirty to Me in Alfa Slab One All 12 Talk Thirty to Me designs Talk Thirty to Me in block capitals →