Free Talk Thirty to Me SVG

Talk Thirty to Me in script and capitals SVG

Talk Thirty to Me in script and capitals, as a solid black shape
Talk Thirty to Me in script and capitals. The preview is the SVG file itself.

“Talk Thirty” in Pacifico script over “TO ME” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 75 mm (3.94 × 2.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut15: 8 outer edges and 7 cut-outs
Cut length1,401 mm at this size
Narrowest part1.2 mm at this size
Nodes301 curve and line segments

Measured from the file. PNG: 2,000 × 1,515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.3 mm356 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.61 mm712 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)0.91 mm1,068 mm12Fine detail: vinyl and paper only, weed with care
4 × 2.99 in (102 × 76 mm)1.2 mm1,423 mm6Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)1.8 mm2,135 mm2Vinyl, card and thin sheet
8 × 5.98 in (203 × 152 mm)2.4 mm2,847 mm1Vinyl, card and thin sheet
12 × 8.98 in (305 × 228 mm)3.7 mm4,270 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Talk Thirty to Me SVG files

← Talk Thirty to Me in block capitals All 12 Talk Thirty to Me designs Talk Thirty to Me with stars →