Free Talk Thirty to Me SVG

Talk Thirty to Me stencil plate SVG

Talk Thirty to Me stencil plate, as a solid black shape
Talk Thirty to Me stencil plate. The preview is the SVG file itself.

A rounded plate with “TALK THIRTY TO ME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,215 mm at this size
Narrowest part1.7 mm at this size
Nodes251 curve and line segments

Measured from the file. PNG: 2,000 × 1,290 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.43 mm309 mm140Too fine for most machines
2 × 1.26 in (51 × 32 mm)0.86 mm617 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.89 in (76 × 48 mm)1.3 mm926 mm15Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)1.7 mm1,234 mm8Vinyl, card and thin sheet
6 × 3.79 in (152 × 96 mm)2.6 mm1,852 mm3Vinyl, card and thin sheet
8 × 5.05 in (203 × 128 mm)3.5 mm2,469 mm2Any material, including 3 mm wood and acrylic
12 × 7.57 in (305 × 192 mm)5.2 mm3,703 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Talk Thirty to Me SVG files

← Talk Thirty to Me outline lettering All 12 Talk Thirty to Me designs Talk Thirty to Me with a drop shadow →