Free t-shirt SVG

T-shirt template, front and back SVG

T-shirt template, front and back, drawn as a line — T-shirt template, front and back. The preview is the SVG file itself.

Two line drawings side by side: the front with its lower neckline and the back with a high one. The pair a designer uses to plan a print on both sides.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 48 mm (3.94 × 1.9 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	12: 2 outer edges and 10 cut-outs
Cut length	893 mm at this size
Narrowest part	2.1 mm at this size
Nodes	183 curve and line segments

Measured from the file. PNG: 2,000 × 1,006 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.48 in (25 × 12 mm)	0.53 mm	227 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 0.97 in (51 × 25 mm)	1.1 mm	454 mm	50	Vinyl, card and thin sheet
3 × 1.45 in (76 × 37 mm)	1.6 mm	680 mm	21	Vinyl, card and thin sheet
4 × 1.93 in (102 × 49 mm)	2.1 mm	907 mm	10	Vinyl, card and thin sheet
6 × 2.9 in (152 × 74 mm)	3.2 mm	1,361 mm	3	Any material, including 3 mm wood and acrylic
8 × 3.86 in (203 × 98 mm)	4.3 mm	1,815 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.8 in (305 × 147 mm)	6.4 mm	2,722 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More t-shirt SVG files

← Striped T-shirt All 16 t-shirts T-shirt alignment ruler →