Free t-shirt SVG

T-shirt alignment ruler SVG

T-shirt alignment ruler, as a solid black shape
T-shirt alignment ruler. The preview is the SVG file itself.

A placement guide for pressing designs on straight: the curved bar sits against the collar and the stem runs down the chest. Scaled to 254 mm (10 inches) wide, the notches are half an inch apart.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.54 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length848 mm at this size
Narrowest part4.4 mm at this size
Nodes199 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,808 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)1.1 mm215 mm110Vinyl, card and thin sheet
2 × 1.8 in (51 × 46 mm)2.2 mm431 mm30Vinyl, card and thin sheet
3 × 2.7 in (76 × 69 mm)3.4 mm646 mm12Any material, including 3 mm wood and acrylic
4 × 3.6 in (102 × 91 mm)4.5 mm862 mm6Any material, including 3 mm wood and acrylic
6 × 5.4 in (152 × 137 mm)6.7 mm1,292 mm2Any material, including 3 mm wood and acrylic
8 × 7.2 in (203 × 183 mm)8.9 mm1,723 mm1Any material, including 3 mm wood and acrylic
12 × 10.8 in (305 × 274 mm)13 mm2,585 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More t-shirt SVG files

← T-shirt template, front and back All 16 t-shirts Layered raglan T-shirt in two colours →