Free t-shirt SVG

Pocket T-shirt laid flat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pocket T-shirt laid flat, as a solid black shape
Pocket T-shirt laid flat. The preview is the SVG file itself.

A shirt laid flat with its short sleeves straight out to the sides, and a chest pocket marked by a slot that is open along the top, so the pocket stays attached.

What is in the file

Size100 × 85 mm (3.94 × 3.36 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length725 mm at this size
Narrowest part1.4 mm at this size
Nodes139 curve and line segments

Measured from the file. PNG: 2,000 × 1,719 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.36 mm184 mm110Too fine for most machines
2 × 1.71 in (51 × 43 mm)0.71 mm368 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.56 in (76 × 65 mm)1.1 mm552 mm12Vinyl, card and thin sheet
4 × 3.42 in (102 × 87 mm)1.4 mm737 mm6Vinyl, card and thin sheet
6 × 5.12 in (152 × 130 mm)2.1 mm1,105 mm2Vinyl, card and thin sheet
8 × 6.83 in (203 × 174 mm)2.8 mm1,473 mm1Vinyl, card and thin sheet
12 × 10.25 in (305 × 260 mm)4.3 mm2,210 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More t-shirt SVG files

← Long sleeve T-shirt All 16 t-shirts Raglan baseball T-shirt →