Free swan SVG

Swan on a lake with reeds SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Swan on a lake with reeds, as a solid black shape
Swan on a lake with reeds. The preview is the SVG file itself.

A swan gliding past cattails inside a round frame, with the lake filling the foot of the circle and two ripples cut into it. The sky is open, so it shows whatever lies behind.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,364 mm at this size
Narrowest part1.1 mm at this size
Nodes333 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.28 mm346 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.56 mm693 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.84 mm1,039 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1.1 mm1,386 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.7 mm2,079 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2.2 mm2,772 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3.4 mm4,157 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More swan SVG files

← Swan monogram frame All 12 swans Swan with a cut feather wing →