Free swan SVG

Swan with raised wings SVG

Swan with raised wings, as a solid black shape
Swan with raised wings. The preview is the SVG file itself.

A swan gliding with its wings arched over its back like sails, neck in an S, with three long feather lines cut along the wing and the knob of a mute swan at the base of the bill.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 91 mm (3.94 × 3.59 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length708 mm at this size
Narrowest part2.4 mm at this size
Nodes165 curve and line segments

Measured from the file. PNG: 2,000 × 1,831 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.61 mm180 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.82 in (51 × 46 mm)1.2 mm360 mm30Vinyl, card and thin sheet
3 × 2.74 in (76 × 69 mm)1.8 mm539 mm12Vinyl, card and thin sheet
4 × 3.65 in (102 × 93 mm)2.4 mm719 mm6Vinyl, card and thin sheet
6 × 5.47 in (152 × 139 mm)3.7 mm1,079 mm2Any material, including 3 mm wood and acrylic
8 × 7.3 in (203 × 185 mm)4.9 mm1,439 mm1Any material, including 3 mm wood and acrylic
12 × 10.94 in (305 × 278 mm)7.3 mm2,158 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More swan SVG files

← Layered white swan in four colours All 12 swans Swan silhouette →