Free swan SVG

Swan with a cut feather wing SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Swan with a cut feather wing, as a solid black shape
Swan with a cut feather wing. The preview is the SVG file itself.

The gliding swan with its wing cut into rows of small feather windows, set like the scales of a fir cone. Back it with patterned or metallic paper. Cut it at full size.

What is in the file

Size100 × 91 mm (3.94 × 3.59 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length695 mm at this size
Narrowest part1.8 mm at this size
Nodes226 curve and line segments

Measured from the file. PNG: 2,000 × 1,831 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.46 mm177 mm100Too fine for most machines
2 × 1.82 in (51 × 46 mm)0.91 mm353 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.74 in (76 × 69 mm)1.4 mm530 mm12Vinyl, card and thin sheet
4 × 3.65 in (102 × 93 mm)1.8 mm706 mm6Vinyl, card and thin sheet
6 × 5.47 in (152 × 139 mm)2.7 mm1,059 mm2Vinyl, card and thin sheet
8 × 7.3 in (203 × 185 mm)3.7 mm1,412 mm1Any material, including 3 mm wood and acrylic
12 × 10.94 in (305 × 278 mm)5.5 mm2,118 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More swan SVG files

← Swan on a lake with reeds All 12 swans Swan outline →