Free strawberry SVG

Split strawberry for a name SVG

Split strawberry for a name, as a solid black shape
Split strawberry for a name. The preview is the SVG file itself.

A seeded strawberry cut across the middle with a clear band between the halves for a name. Two pieces: the top with the calyx, and the pointed bottom.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size83 × 100 mm (3.26 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut8: 2 outer edges and 6 cut-outs
Cut length632 mm at this size
Narrowest part2.8 mm at this size
Nodes119 curve and line segments

Measured from the file. PNG: 1,671 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.71 mm161 mm110Fine detail: vinyl and paper only, weed with care
1.66 × 2 in (42 × 51 mm)1.4 mm321 mm30Vinyl, card and thin sheet
2.49 × 3 in (63 × 76 mm)2.1 mm482 mm12Vinyl, card and thin sheet
3.32 × 4 in (84 × 102 mm)2.8 mm642 mm6Vinyl, card and thin sheet
4.97 × 6 in (126 × 152 mm)4.3 mm963 mm2Any material, including 3 mm wood and acrylic
6.63 × 8 in (168 × 203 mm)5.7 mm1,284 mm1Any material, including 3 mm wood and acrylic
9.95 × 12 in (253 × 305 mm)8.5 mm1,926 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More strawberry SVG files

← Strawberry monogram frame All 15 strawberries Strawberry cut in half →