Free strawberry SVG

Strawberry cut in half SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Strawberry cut in half, as a solid black shape
Strawberry cut in half. The preview is the SVG file itself.

A berry sliced top to bottom: the skin as a rim, a pale core cut out of the middle and fine lines running from the core towards the skin.

What is in the file

Size83 × 100 mm (3.26 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length678 mm at this size
Narrowest part3.2 mm at this size
Nodes100 curve and line segments

Measured from the file. PNG: 1,671 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.81 mm172 mm110Fine detail: vinyl and paper only, weed with care
1.66 × 2 in (42 × 51 mm)1.6 mm344 mm30Vinyl, card and thin sheet
2.49 × 3 in (63 × 76 mm)2.4 mm517 mm12Vinyl, card and thin sheet
3.32 × 4 in (84 × 102 mm)3.3 mm689 mm6Any material, including 3 mm wood and acrylic
4.97 × 6 in (126 × 152 mm)4.9 mm1,033 mm2Any material, including 3 mm wood and acrylic
6.63 × 8 in (168 × 203 mm)6.5 mm1,378 mm1Any material, including 3 mm wood and acrylic
9.95 × 12 in (253 × 305 mm)9.8 mm2,067 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More strawberry SVG files

← Split strawberry for a name All 15 strawberries Cute strawberry with a face →