Free strawberry SVG

Layered strawberry in three colours SVG

Layered strawberry in three colours, in layered colours
Layered strawberry in three colours. The preview is the SVG file itself.

Three layers to stack: a red berry, a green calyx and stalk to lay over its top, and a sheet of yellow seeds to dot across it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size88 × 100 mm (3.47 × 3.94 in), scales to any size
Pieces18 separate pieces
Outlines to cut18 outlines
Cut length814 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes218 curve and line segments
Layers3: berry, leaves and seeds

Measured from the file. PNG: 1,773 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.88 × 1 in (22 × 25 mm)Over 1.5 mm207 mm110Vinyl, card and thin sheet
1.76 × 2 in (45 × 51 mm)Over 3 mm414 mm30Any material, including 3 mm wood and acrylic
2.65 × 3 in (67 × 76 mm)Over 4.6 mm620 mm12Any material, including 3 mm wood and acrylic
3.53 × 4 in (90 × 102 mm)Over 6.1 mm827 mm6Any material, including 3 mm wood and acrylic
5.29 × 6 in (134 × 152 mm)Over 9.1 mm1,241 mm2Any material, including 3 mm wood and acrylic
7.06 × 8 in (179 × 203 mm)Over 12 mm1,654 mm1Any material, including 3 mm wood and acrylic
10.58 × 12 in (269 × 305 mm)Over 18 mm2,481 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More strawberry SVG files

← Strawberry plant border All 15 strawberries Strawberry with seeds →