Free squirrel SVG

Squirrel on an oak branch SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Squirrel on an oak branch, as a solid black shape
Squirrel on an oak branch. The preview is the SVG file itself.

A squirrel sitting on a bough with oak leaves at both ends and two acorns hanging below. The feet and tail rest on the branch, so the whole scene is one piece.

What is in the file

Size100 × 78 mm (3.94 × 3.08 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length676 mm at this size
Narrowest part1.1 mm at this size
Nodes498 curve and line segments

Measured from the file. PNG: 2,000 × 1,581 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.28 mm172 mm120Too fine for most machines
2 × 1.56 in (51 × 40 mm)0.56 mm343 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.35 in (76 × 60 mm)0.84 mm515 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.13 in (102 × 79 mm)1.1 mm687 mm6Vinyl, card and thin sheet
6 × 4.69 in (152 × 119 mm)1.7 mm1,030 mm2Vinyl, card and thin sheet
8 × 6.26 in (203 × 159 mm)2.2 mm1,374 mm1Vinyl, card and thin sheet
12 × 9.38 in (305 × 238 mm)3.4 mm2,060 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More squirrel SVG files

← Baby squirrel asleep in its tail All 12 squirrels Squirrel face →