Free squirrel SVG

Baby squirrel asleep in its tail SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby squirrel asleep in its tail, as a solid black shape
Baby squirrel asleep in its tail. The preview is the SVG file itself.

A young squirrel curled into a ball with its tail wrapped round it like a blanket, one ear up and its eye shut. Low and round, for nursery prints, ornaments and stickers.

What is in the file

Size100 × 73 mm (3.94 × 2.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length743 mm at this size
Narrowest part1 mm at this size
Nodes390 curve and line segments

Measured from the file. PNG: 2,000 × 1,479 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 19 mm)0.25 mm189 mm130Too fine for most machines
2 × 1.46 in (51 × 37 mm)0.51 mm377 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.19 in (76 × 56 mm)0.76 mm566 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.92 in (102 × 74 mm)1 mm755 mm6Vinyl, card and thin sheet
6 × 4.37 in (152 × 111 mm)1.5 mm1,132 mm2Vinyl, card and thin sheet
8 × 5.83 in (203 × 148 mm)2 mm1,510 mm2Vinyl, card and thin sheet
12 × 8.75 in (305 × 222 mm)3 mm2,265 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More squirrel SVG files

← Cute squirrel with a big tail All 12 squirrels Squirrel on an oak branch →