Sorry I’m Late outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Sorry I’m Late I Didn’t Want to Come” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 45 mm (3.94 × 1.78 in), scales to any size |
|---|---|
| Pieces | 34 separate pieces |
| Outlines to cut | 85: 34 outer edges and 51 cut-outs |
| Cut length | 1,780 mm at this size |
| Narrowest part | 0.8 mm at this size |
| Nodes | 777 curve and line segments |
Measured from the file. PNG: 2,000 × 946 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.45 in (25 × 11 mm) | 0.2 mm | 452 mm | 180 | Too fine for most machines |
| 2 × 0.9 in (51 × 23 mm) | 0.41 mm | 904 mm | 55 | Too fine for most machines |
| 3 × 1.36 in (76 × 34 mm) | 0.61 mm | 1,356 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.81 in (102 × 46 mm) | 0.81 mm | 1,808 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 6 × 2.71 in (152 × 69 mm) | 1.2 mm | 2,713 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.62 in (203 × 92 mm) | 1.6 mm | 3,617 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.42 in (305 × 138 mm) | 2.4 mm | 5,425 mm | 2 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Sorry I’m Late I Didn’t Want to Come SVG files
-
Sorry I’m Late stencil plate Solid · one piece -
Sorry I’m Late with a drop shadow Layered · 23 pieces -
Sorry I’m Late in Pacifico Solid · 15 pieces -
Sorry I’m Late in Lobster Solid · 19 pieces -
Sorry I’m Late in Lilita One Solid · 14 pieces -
Sorry I’m Late in Amatic SC Solid · 29 pieces -
Sorry I’m Late in block capitals Solid · 29 pieces -
Sorry I’m Late in script and capitals Solid · 23 pieces
← Sorry I’m Late with stars All 10 Sorry I’m Late I Didn’t Want to Come designs Sorry I’m Late stencil plate →