Sorry I’m Late with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Sorry I’m Late I Didn’t Want to Come” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.61 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 40: 18 outer edges and 22 cut-outs |
| Cut length | 2,115 mm at this size |
| Narrowest part | 0.6 mm at this size |
| Nodes | 848 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,354 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.15 mm | 537 mm | 140 | Too fine for most machines |
| 2 × 1.33 in (51 × 34 mm) | 0.3 mm | 1,074 mm | 35 | Too fine for most machines |
| 3 × 1.99 in (76 × 51 mm) | 0.46 mm | 1,612 mm | 15 | Too fine for most machines |
| 4 × 2.66 in (102 × 67 mm) | 0.61 mm | 2,149 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 6 × 3.98 in (152 × 101 mm) | 0.91 mm | 3,223 mm | 2 | Fine detail: vinyl and paper only, weed with care |
| 8 × 5.31 in (203 × 135 mm) | 1.2 mm | 4,298 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.97 in (305 × 202 mm) | 1.8 mm | 6,447 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Sorry I’m Late I Didn’t Want to Come SVG files
-
Sorry I’m Late with a star Solid · 24 pieces
-
Sorry I’m Late in Pacifico Solid · 15 pieces
-
Sorry I’m Late in Lobster Solid · 19 pieces
-
Sorry I’m Late in Lilita One Solid · 30 pieces
-
Sorry I’m Late in Amatic SC Solid · 29 pieces
-
Sorry I’m Late in block capitals Solid · 29 pieces
-
Sorry I’m Late in script and capitals Solid · 23 pieces
-
Sorry I’m Late with stars Solid · 25 pieces
← Sorry I’m Late stencil plate All 11 Sorry I’m Late I Didn’t Want to Come designs Sorry I’m Late with a star →