Sorry I’m Late in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Sorry I’m Late I Didn’t Want to Come” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 48 mm (3.94 × 1.89 in), scales to any size |
|---|---|
| Pieces | 30 separate pieces |
| Outlines to cut | 39: 30 outer edges and 9 cut-outs |
| Cut length | 1,115 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 440 curve and line segments |
Measured from the file. PNG: 2,000 × 998 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.48 in (25 × 12 mm) | 0.43 mm | 283 mm | 170 | Too fine for most machines |
| 2 × 0.96 in (51 × 24 mm) | 0.86 mm | 566 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.44 in (76 × 36 mm) | 1.3 mm | 850 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.92 in (102 × 49 mm) | 1.7 mm | 1,133 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.87 in (152 × 73 mm) | 2.6 mm | 1,699 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.83 in (203 × 97 mm) | 3.5 mm | 2,266 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.75 in (305 × 146 mm) | 5.2 mm | 3,399 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Sorry I’m Late I Didn’t Want to Come SVG files
-
Sorry I’m Late in Amatic SC Solid · 29 pieces
-
Sorry I’m Late in block capitals Solid · 29 pieces
-
Sorry I’m Late in script and capitals Solid · 23 pieces
-
Sorry I’m Late with stars Solid · 25 pieces
-
Sorry I’m Late outline lettering Outline · 34 pieces
-
Sorry I’m Late stencil plate Solid · one piece
-
Sorry I’m Late with a drop shadow Layered · 18 pieces
-
Sorry I’m Late with a star Solid · 24 pieces
← Sorry I’m Late in Lobster All 11 Sorry I’m Late I Didn’t Want to Come designs Sorry I’m Late in Amatic SC →