Sorry I’m Late in block capitals SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“SORRY I’M LATE I DIDN’T WANT TO COME” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.
What is in the file
| Size | 100 × 75 mm (3.94 × 2.93 in), scales to any size |
|---|---|
| Pieces | 29 separate pieces |
| Outlines to cut | 38: 29 outer edges and 9 cut-outs |
| Cut length | 2,122 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 352 curve and line segments |
Measured from the file. PNG: 2,000 × 1,510 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.75 in (25 × 19 mm) | 0.48 mm | 539 mm | 120 | Too fine for most machines |
| 2 × 1.49 in (51 × 38 mm) | 0.97 mm | 1,078 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.24 in (76 × 57 mm) | 1.4 mm | 1,617 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.98 in (102 × 76 mm) | 1.9 mm | 2,156 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.47 in (152 × 114 mm) | 2.9 mm | 3,234 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.96 in (203 × 151 mm) | 3.9 mm | 4,312 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 8.94 in (305 × 227 mm) | 5.8 mm | 6,468 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Sorry I’m Late I Didn’t Want to Come SVG files
-
Sorry I’m Late in script and capitals Solid · 23 pieces -
Sorry I’m Late with stars Solid · 25 pieces -
Sorry I’m Late outline lettering Outline · 34 pieces -
Sorry I’m Late stencil plate Solid · one piece -
Sorry I’m Late with a drop shadow Layered · 23 pieces -
Sorry I’m Late in Pacifico Solid · 15 pieces -
Sorry I’m Late in Lobster Solid · 19 pieces -
Sorry I’m Late in Lilita One Solid · 14 pieces
← Sorry I’m Late in Amatic SC All 10 Sorry I’m Late I Didn’t Want to Come designs Sorry I’m Late in script and capitals →