Free snowman SVG

Classic snowman with a top hat SVG

Classic snowman with a top hat, as a solid black shape — Classic snowman with a top hat. The preview is the SVG file itself.

Three snowballs, a tilted top hat, a scarf with a hanging tail, stick arms, a coal face, a carrot nose and three buttons. The details are holes, so the whole snowman is one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	662 mm at this size
Narrowest part	1.8 mm at this size
Nodes	143 curve and line segments

Measured from the file. PNG: 1,404 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (18 × 25 mm)	0.46 mm	168 mm	130	Too fine for most machines
1.38 × 2 in (35 × 51 mm)	0.91 mm	336 mm	35	Fine detail: vinyl and paper only, weed with care
2.07 × 3 in (53 × 76 mm)	1.4 mm	504 mm	15	Vinyl, card and thin sheet
2.76 × 4 in (70 × 102 mm)	1.8 mm	673 mm	8	Vinyl, card and thin sheet
4.14 × 6 in (105 × 152 mm)	2.7 mm	1,009 mm	2	Vinyl, card and thin sheet
5.52 × 8 in (140 × 203 mm)	3.7 mm	1,345 mm	2	Any material, including 3 mm wood and acrylic
8.28 × 12 in (210 × 305 mm)	5.5 mm	2,018 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowman SVG files

← Snowman stick arms All 15 snowmen Simple two-ball snowman →