Free snowman SVG

Snowman stick arms SVG

Snowman stick arms, as a solid black shape — Snowman stick arms. The preview is the SVG file itself.

A left and a right stick arm with twig fingers, as two loose pieces. Put one each side of a bauble, a jar or a painted snowman.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 25 mm (3.94 × 0.97 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	2 outlines
Cut length	258 mm at this size
Narrowest part	2.9 mm at this size
Nodes	24 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 550 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.25 in (25 × 6 mm)	0.74 mm	66 mm	270	Fine detail: vinyl and paper only, weed with care
2 × 0.49 in (51 × 12 mm)	1.5 mm	131 mm	85	Vinyl, card and thin sheet
3 × 0.74 in (76 × 19 mm)	2.2 mm	197 mm	39	Vinyl, card and thin sheet
4 × 0.98 in (102 × 25 mm)	2.9 mm	262 mm	20	Vinyl, card and thin sheet
6 × 1.48 in (152 × 37 mm)	4.4 mm	393 mm	7	Any material, including 3 mm wood and acrylic
8 × 1.97 in (203 × 50 mm)	5.9 mm	524 mm	5	Any material, including 3 mm wood and acrylic
12 × 2.95 in (305 × 75 mm)	8.8 mm	786 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowman SVG files

← Snowman top hat All 15 snowmen Classic snowman with a top hat →