Free snowman SVG

Waving snowman SVG

Waving snowman, as a solid black shape — Waving snowman. The preview is the SVG file itself.

A three-ball snowman with one arm raised in a wave and the other held out, a top hat tipped the other way and a scarf.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	63 × 100 mm (2.46 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	660 mm at this size
Narrowest part	1.8 mm at this size
Nodes	142 curve and line segments

Measured from the file. PNG: 1,281 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.63 × 1 in (16 × 25 mm)	0.46 mm	168 mm	140	Too fine for most machines
1.25 × 2 in (32 × 51 mm)	0.91 mm	335 mm	40	Fine detail: vinyl and paper only, weed with care
1.88 × 3 in (48 × 76 mm)	1.4 mm	503 mm	15	Vinyl, card and thin sheet
2.5 × 4 in (64 × 102 mm)	1.8 mm	671 mm	8	Vinyl, card and thin sheet
3.76 × 6 in (95 × 152 mm)	2.7 mm	1,006 mm	3	Vinyl, card and thin sheet
5.01 × 8 in (127 × 203 mm)	3.7 mm	1,341 mm	2	Any material, including 3 mm wood and acrylic
7.51 × 12 in (191 × 305 mm)	5.5 mm	2,012 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowman SVG files

← Snowman with a bobble hat All 15 snowmen Cute little snowman →