Coiled snake SVG
A snake wound in a flat coil with its tail at the centre and its head lifted off the last turn, tongue out. A row of diamonds is cut down its back and an open gap runs between the turns.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 98 mm (3.94 × 3.87 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 35: 1 outer edge and 34 cut-outs |
| Cut length | 1,081 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 501 curve and line segments |
Measured from the file. PNG: 2,000 × 1,965 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.98 in (25 × 25 mm) | 0.36 mm | 275 mm | 100 | Too fine for most machines |
| 2 × 1.96 in (51 × 50 mm) | 0.71 mm | 549 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.95 in (76 × 75 mm) | 1.1 mm | 824 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.93 in (102 × 100 mm) | 1.4 mm | 1,098 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.89 in (152 × 150 mm) | 2.1 mm | 1,647 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.86 in (203 × 200 mm) | 2.8 mm | 2,197 mm | 1 | Vinyl, card and thin sheet |
| 12 × 11.78 in (305 × 299 mm) | 4.3 mm | 3,295 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snake SVG files
-
Snake silhouette Solid · one piece -
Cobra snake with its hood spread Solid · one piece -
Rattlesnake with its mouth open Solid · one piece -
Ouroboros snake eating its tail Solid · one piece -
Snake head with a forked tongue Solid · one piece -
Cute snake with a smile Solid · one piece -
Python snake on a branch Solid · one piece -
Snakeskin pattern panel Solid · one piece