Free snake SVG

Snake head with a forked tongue SVG

Snake head with a forked tongue, as a solid black shape — Snake head with a forked tongue. The preview is the SVG file itself.

A snake head in profile with the mouth wide open: two long fangs, a row of small teeth, a slit eye and a forked tongue flicking out. A few scales are cut into the neck.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 61 mm (3.94 × 2.39 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	754 mm at this size
Narrowest part	1.2 mm at this size
Nodes	219 curve and line segments

Measured from the file. PNG: 2,000 × 1,244 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.61 in (25 × 15 mm)	0.3 mm	192 mm	150	Too fine for most machines
2 × 1.21 in (51 × 31 mm)	0.61 mm	383 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.82 in (76 × 46 mm)	0.91 mm	575 mm	18	Fine detail: vinyl and paper only, weed with care
4 × 2.43 in (102 × 62 mm)	1.2 mm	766 mm	8	Vinyl, card and thin sheet
6 × 3.64 in (152 × 93 mm)	1.8 mm	1,149 mm	3	Vinyl, card and thin sheet
8 × 4.86 in (203 × 123 mm)	2.4 mm	1,532 mm	2	Vinyl, card and thin sheet
12 × 7.28 in (305 × 185 mm)	3.7 mm	2,298 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snake SVG files

← Ouroboros snake eating its tail All 12 snakes Cute snake with a smile →