Free snake SVG

Rattlesnake with its mouth open SVG

Rattlesnake with its mouth open, as a solid black shape — Rattlesnake with its mouth open. The preview is the SVG file itself.

A rattlesnake piled in three coils and ready to strike: neck drawn back in an S, jaws open to show two fangs and a forked tongue, and the rattle held up at the other end.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 91 mm (3.94 × 3.59 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	18: 1 outer edge and 17 cut-outs
Cut length	1,004 mm at this size
Narrowest part	1.9 mm at this size
Nodes	449 curve and line segments

Measured from the file. PNG: 2,000 × 1,829 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.91 in (25 × 23 mm)	0.48 mm	255 mm	100	Too fine for most machines
2 × 1.82 in (51 × 46 mm)	0.97 mm	510 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.73 in (76 × 69 mm)	1.4 mm	765 mm	12	Vinyl, card and thin sheet
4 × 3.64 in (102 × 93 mm)	1.9 mm	1,020 mm	6	Vinyl, card and thin sheet
6 × 5.47 in (152 × 139 mm)	2.9 mm	1,530 mm	2	Vinyl, card and thin sheet
8 × 7.29 in (203 × 185 mm)	3.9 mm	2,040 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.93 in (305 × 278 mm)	5.8 mm	3,060 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snake SVG files

← Cobra snake with its hood spread All 12 snakes Ouroboros snake eating its tail →