Free smiley face SVG

Pixel smiley face SVG

Pixel smiley face. The preview is the SVG file itself.

The face drawn on a grid of sixteen squares each way, as an early computer would show it: a stepped ring, two upright eyes and a flat smile turned up at the ends.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	5: 4 outer edges and 1 cut-out
Cut length	938 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	150 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	Over 1.5 mm	238 mm	100	Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)	Over 3 mm	477 mm	25	Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)	Over 4.6 mm	715 mm	9	Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)	Over 6.1 mm	953 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	Over 9.1 mm	1,430 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	Over 12 mm	1,906 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	Over 18 mm	2,859 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More smiley face SVG files

← Grunge smiley face All 15 smiley faces Smile from a smiley face →