Free smiley face SVG

Winking smiley face SVG

Winking smiley face, drawn as a line
Winking smiley face. The preview is the SVG file itself.

One eye open and one shut in a wink, with a lopsided smile and the tip of the tongue poking out. Drawn as a ring with loose solid features.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut5: 4 outer edges and 1 cut-out
Cut length853 mm at this size
Narrowest part4.6 mm at this size
Nodes76 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)1.2 mm217 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)2.3 mm433 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)3.5 mm650 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)4.7 mm867 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)7 mm1,300 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)9.3 mm1,733 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)14 mm2,600 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More smiley face SVG files

← Happy smiley face laughing All 15 smiley faces Smiley face with heart eyes →