Free smiley face SVG

Smiley face outline SVG

Smiley face outline, drawn as a line
Smiley face outline. The preview is the SVG file itself.

The same face as a ring 4.6 mm wide with the eyes and the smile as solid pieces inside it. Four loose parts in all: lift them together on transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut5: 4 outer edges and 1 cut-out
Cut length843 mm at this size
Narrowest part4.6 mm at this size
Nodes54 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)1.2 mm214 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)2.3 mm428 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)3.5 mm642 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)4.7 mm856 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)7 mm1,285 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)9.3 mm1,713 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)14 mm2,569 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More smiley face SVG files

← Classic smiley face All 15 smiley faces Happy smiley face laughing →