Free Santa Cam SVG

Santa Cam with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa Cam with stars, as a solid black shape
Santa Cam with stars. The preview is the SVG file itself.

“Santa Cam” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size81 × 100 mm (3.19 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut12: 9 outer edges and 3 cut-outs
Cut length999 mm at this size
Narrowest part1.4 mm at this size
Nodes270 curve and line segments

Measured from the file. PNG: 1,633 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.81 × 1 in (21 × 25 mm)0.36 mm254 mm120Too fine for most machines
1.62 × 2 in (41 × 51 mm)0.71 mm507 mm30Fine detail: vinyl and paper only, weed with care
2.43 × 3 in (62 × 76 mm)1.1 mm761 mm12Vinyl, card and thin sheet
3.24 × 4 in (82 × 102 mm)1.4 mm1,015 mm6Vinyl, card and thin sheet
4.85 × 6 in (123 × 152 mm)2.1 mm1,522 mm2Vinyl, card and thin sheet
6.47 × 8 in (164 × 203 mm)2.8 mm2,030 mm1Vinyl, card and thin sheet
9.71 × 12 in (247 × 305 mm)4.3 mm3,045 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa Cam SVG files

← Santa Cam in script and capitals All 13 Santa Cam designs Santa Cam outline lettering →